IPC-E Setup instructions
IPC Activation
Activation via software:
– Open VIASecurity Scanner– Select the inactive device with a checkbox. Marked in red Inactive.– Enter …
IPC Enabling VIASecurity Connect
Steps:
– Configuration/ Network/ Platform Access/ VIASecurity Connect– Enable the service– Set the video stream encryption passw…
IPC Motion detection settings
Steps:
– Activate the function– Configure the Person/Vehicle filters. Sensor sensitivity – the higher the sensitivity, the small…
IPC Backlight settings
Steps:
– Configuration/ Image/ Day/Night switch: Auto – the camera switches to night mode automatically based on the light sensor; Day…
IPC Storage settings
Steps:
– Install the storage device and format it– Configure quotas for image storage if necessary. If you do not plan to store images…
IPC Time setting
Steps:
– Configuration/ General settings/ Time settings – Select time zone – Enable Time synchronization via NTP – Use loc…
IPC Firmware update
Steps:
– Maintenance/ Update/ Upload the firmware file– Click update. After a successful update, the device will reboot– Firmwar…
IPC Password reset
Steps:
– Open VIASecurity Scanner.– Select the device for which you need to restore the password.– Click Forgot Password.–…